...
Specifies the FLEXPART executable. data preparation modeBoth absolute and relative path can be given here. If left empty Metview will use the MV_FLEXPART_EXECUTABLE_PATH environment variable to locate the executable.
Input
...
Mode
The MARS experiment identifier of the forecast fields. The default value is 1 Icon (operational forecast).
Input Data
The i
Input Path
Specifies the location of the input data (GRIB) .
Flextra An Mars Expver
The MARS experiment identifier of the analysis fields. The default value is 1 (operational analysis).
Flextra Date
files. Both absolute and relative path can be given here.
Available File Path
Specifies the location of the AVAILABLE file. If the default value (the string literal SAME_AS_INPUT_PATH) is set it indicates that the AVAILABLE file is located in the same directory as the input data.
Output Path
Specifies the location of the output data files. Both absolute and relative path can be given here.
Run Label
Specifies a run label for the FLEXPART simulation.
Simulation Direction
Specifies the FLEXPART simulation direction in time. The possible values are: Forward and Backward. The default value is Forward.
Starting Date
Specifies the beginning date of the simulation in a YYYYMMDD format.
Starting Time
Specifies the beginning time of the simulation in a HH[:MM[:SS]] format.
Ending Date
Specifies the ending date of the simulation in a YYYYMMDD format.
Ending Time
Specifies the ending time of the simulation in a HH[:MM[:SS]] format.
Output Rate
Specifies the frequency for the output generation. The output is averaged over the period given in Output Averaging Interval. The format is a HHH[:MM[:SS]]. The default value is 3 (hours).
Output Averaging Interval
Specifies the averaging interval for the output generation. The format is a HHH[:MM[:SS]] format. If 0 is given here instantaneous values are written into the output files. The default value is 3 (hours).
Output Sampling Rate
Specifies the sampling rate that is used for the averaging of the output. This period must be shorter than the Output Averaging Interval. The format is a HHH[:MM[:SS]] format. The default value is 1 (hours).
Output Field Type
Specifies the type of the gridded output. The possible values are: none (no gridded output), conc (concentration), mixr (mixing ratio) and both (concentration and mixing ratio). The default value is conc.
Output flux
Specifies if the fluxes should be computed and written out as a gridded output (on or off). The default value is off.
Output trajectory
Specifies if the plume trajectories should be computed (on or off). The default value is off.
Output area
Specifies the area for the gridded output in degrees in a S/W/N/E format. The default value is-90/-180/90/180.
Output grid
Specifies the grid resolution for the gridded output in degrees in an east_west_resolution/north_south_resolution format. The default value is 1/1. Specifies the run date of the forecast. Available when Flextra Prepare Mode is Forecast.
Flextra Time
Specifies the run time of the forecast . Available when Flextra Prepare Mode is Forecast.
...