A new page with TIGGE-LAM data usage statistics was added.


Starting from the 1st of June, 2018 four more ensemble members from COMO-LEPS model have been added to the archive. Actually the 20 eps members have already been available  since the 1st of December 2016 but that information was not provided that time unfortunately. Those 4 additional eps members could be added for the whole period potentially in the future depending on available resources.


The new version of the  LAM-EPS run by DMI was implemented.The first affected runs in TIGGE-LAM archive are on 2018-05-22. The major changes:

  • new ensemble system based on the convection permitting HARMONIE-AROME model

  • outputs up to +42h

  • 1 less parameter for TIGGE-LAM archive as the large scale precipitation does not exist any more in the the convection permitting system

  • 2 newly provided parameters for TIGGE-LAM archive CAPE and CIN


The new set-up of COSMO model ("COSMO-D2") replaces the former COSMO-DE.  Methods of EPS member generation has not changed. The major changes:

  • grid spacing reduced from 2.8 km to 2.2 km
  • number of vertical levels increased from 50 to 65 with higher resolution in the boundary layer
  • model domain enlarged, mainly to the west

The updated description is available here.


Following major changes apply to COSMO-DE-EPS update:

  • the use of four global models via BCEPS for initial and boundary conditions is switched off
  • initial conditions are provided by analysis members of an Local Ensemble Transform Kalman Filter
  • boundary conditions are provided by members of ICON-EPS (40 km grid size with a two-way nested grid of 20 km over Europe)
  • additional parameters of physics packages are perturbed
  • selection out of a set of predefined parameter perturbations is randomized (selection performed for each forecast start)
  • stochastic perturbations of SST and soil-moisture on specific spatial scales

The model description is available here.


The MOGREPS-UK forecasts were extended to T+54 (from T+36) starting from 9UTC run on 2016-11-08.

The updated description is available here.


The major changes in HUNEPS LAM ensemble system were implemented:
  • ENS boundary conditions used instead of PEARP ones
  • new 2 meter diagnostics improving 2 meter temperature forecast

The updated description is available here.


The global model GME has been replaced by the new global model ICON. This change affects the COSMO-DE-EPS  because four global models (including ICON, GME before) are used to perturbat IC and BC (dynamically downscaled with BC-EPS). The updated description is available here.