Grid geometry
ERA5 data is produced and archived as spectral coefficients or on a reduced Gaussian grid, which has quasi-uniform spacing over the globe. Reduced Gaussian grids have a series of evenly spaced data points along each parallel (latitude), and parallels spaced at quasi-regular intervals. Near the poles there are only a few points along a parallel, but close to the equator there are many more data points along a parallel.
A reduced Gaussian grid is quite different from a Cartesian grid (a two-dimensional rectangular grid).
The ERA5 HRES (High Resolution) and EDA (Ensemble) data are archived in these grid representations:
- Some (upper air) parameters are archived as spectral coefficients (indicated in the data as 'sh', Spherical Harmonics) with a triangular truncation of T639 (HRES) and T319 (EDA)
- Some (including all the surface) parameters are archived on a reduced Gaussian grid with a resolution of N320 (HRES) and N160 (EDA). These grids are so called "linear grids", sometimes referred to as TL639 (HRES) and TL319 (EDA). N320, for example, refers to the number of latitude circles from pole to equator.
For wave data, both HRES and EDA are archived on a reduced latitude/longitude grid.
For a list of spectral, Gaussian and equivalent lat/lon grids see the Open IFS FAQ > OpenIFS questions: general and runtime > "What does the 'T' mean in 'T511', 'T1279' etc?" and "How do I know the grid from from the 'T' number?"
When you download ERA5 data, the grid geometry of your output data depends on the selected data format:
- If you request the data in the native GRIB format it is delivered with the above grid geometry.
- If you request the data in NetCDF format, it is automatically converted and interpolated from the above grids to a regular lat/lon grid.
Grid resolution
The ERA5 HRES (High Resolution) data has a native resolution of 0.28125 degrees (31km), and the EDA (Ensemble) has a resolution of 0.5625 degrees (62km).
The wave HRES (High Resolution) data has a native resolution of 0.36 degrees, and and the wave EDA (ensemble) has a resolution of 1.0 degrees (EDA).
Projection
All gridded data is made available in spherical coordinates, i.e. unprojected. Some GIS software applications call this 'Geographic Coordinate Systems'.
Coordinate system
All gridded data is made available in Decimal Degrees, lat/lon, with latitude values in the range [-90;+90] referenced to the equator and longitude values in the range [0;360] referenced to the Greenwich Prime Meridian. Some software applications automatically display these longitudes in the range [-180;+180].
Earth model
For data in GRIB1 format the earth model is a sphere with radius = 6367.47 km, as defined in the WMO GRIB Edition 1 specifications, Table 7, GDS Octet 17
For data in GRIB2 format the earth model is a sphere with radius = 6371.2290 km, as defined in the WMO GRIB2 specifications, section 2.2.1, Code Table 3.2, Code figure 6.
For data in NetCDF format (i.e. converted from the native GRIB format to NetCDF), the earth model is inherited from the GRIB data.
Interpolation
When you download ERA5 data you optionally can have the data interpolated to a custom grid and horizontal resolution (eg. 'grid':'0.5/0.5'). The default interpolation method is bilinear for continuous parameters (e.g. Temperature) and nearest neighbour for discrete parameters (eg. Vegetation).
The lat/long equivalent of T639 is 0.28125 deg (360/(2*(639+1))). However, the GRIB1 format only supports three decimals, so we recommend you in any case round the resolution; we recommend to at least 0.3 deg. Specifying a higher resolution is technically possible, e.g. as 'grid':'0.1/0.1', but this only oversamples the data and does not improve the accuracy of the data.
If you request data in NetCDF format ('format':'netcdf'), interpolation to a regular grid is mandatory, because ECMWF's NetCDF implementation only supports regular grids. Specify the desired lat/lon grid with the 'grid' keyword, for example 'grid':'0.5/0.5'.
Visualisation of regular lat/lon data
If you use ERA5 data in a regular lat/lon grid, many software applications by default visualise the data as a continuous tiled surface, as in plot (a) on the right. In this case think of the data values as referring to the centres of the tiles. However, you might prefer to think of the ERA5 data as point data with a regular spacing, as shown on the right in plot (b): here global ERA5 data was downloaded with a regular lat/lon grid and a resolution r of 0.3 deg, and plotted on top of a satellite image with 0.25 degree image resolution. The 'top left' ERA5 data point is always at Longitude=0 ; Latitude=90, with further grid points spaced by r, and the 'bottom right' grid point at Longitude=360-r ; Latitude=-90. | (a) Visualisation of regular lat/lon data as a continuous tiled surface 
(b) Visualisation of regular lat/lon data as point matrix |
For GIS users
Some software applications do not recognise the spatial reference information embedded in the data file and may require you to manually assign a spatial reference. In this case use a 6367.47km sphere for all data if possible. This GRIB1 sphere does not have an EPSG code.
Comparison with other ERA products
Related articles
