Description of upgrade
The CAMS IFS cycle 46R1 is based on ECMWF's IFS cycle 46R1 . IFS Cycle 46r1 is an upgrade with many scientific contributions, including changes in the use of observations and in modelling. The new cycle also includes an upgrade of the vertical resolution from 60 model levels to 137 model levels.
The page will be updated as required. It was last changed on 20.06.2019.
For a record of changes made to this page please refer to Document versions .
Further information and advice regarding the upgrade can be obtained from the Copernicus User Support.
| Table of Contents | ||||
|---|---|---|---|---|
|
Timetable for implementation
The planned timetable for the implementation of the cycle 46r1 is as follows:
| Date | Event |
|---|---|
| 08-05-2019 | Announcement of expected implementation date |
| 09-07-2019 (TBC) | Implementation |
The timetable represents current expectations and may change in light of actual progress made.
Current Status
IFS cycle 46r1 is going through its final testing phase.
Meteorological content of the new cycle
The meteorological changes can be found on the ECMWF IFS CY46R1 page .
Atmospheric composition content of the new cycle
Assimilation
- New model-error covariance matrices for aerosol and chemistry at 137 levels.
Observations
- No new atmospheric composition observations compared to Cycle 45r1.
Emissions
- New emissions inventories: CAMS_GLOB_ANT v2.1 (anthropogenic) and CAMS_GLOB_BIO v1.1 (biogenic), in place of previous MACCity and MEGAN_MACC inventories.
- Biomass-burning injection heights from GFAS, and updated diurnal cycle. In particular, this reduces the overestimation of near-surface PM2.5 during fire events.
- Anthropogenic SOA production updated with a diurnal cycle and regionally-varying ratio to CO emissions. This has a small impact on AOD, but significantly reduces night-time overestimation of near-surface PM2.5 in polluted regions.
- New online dust emission scheme (Nabat et al., 2012). This increases total dust emissions and shifts them towards larger particle sizes, in line with recent literature. An updated dust source function improves the selection of source regions, reducing "gaps" in dust emissions.
- Sea-salt production over freshwater lakes eliminated. This corrects an issue that was particularly noticeable over the Great Lakes.
Other model changes
- Vertical resolution increased from 60 levels to 137 levels, matching that used at ECMWF for NWP. This includes moving the model top from 0.1 hPa to 0.01 hPa.
- New nitrate and ammonium aerosol species, coupled to the gas-phase nitrogen chemistry. See new model parameters below. This is a major expansion of the aerosol species represented in the model, giving a more complete representation of the species which contribute to e.g. PM2.5 over Europe.
Sulfur species (SO2 and SO4) coupled between chemistry and aerosol schemes. See discontinued parameters below. This brings a greater consistency between the chemistry and aerosol products related to the sulfur cycle.
- Online calculation of dry deposition velocities for trace gases. This was already in place for aerosols in 45r1, and allows the deposition scheme to better account for variations in surface properties..
- Updates to wet deposition parameterisations. This brings improvements in the distinction between scavenging by liquid and ice, and harmonises the treatment for aerosols and trace gases.
- Updates to chemical reaction rates following latest recommendations by JPL/IUPAC.
Impact of the new cycle
The new cycle is being validated by the CAMS Validation team and the results will be presented in a validation report.
Technical details of the new cycle
Changes to GRIB encoding
| paramId | shortName | name | units | GRIB edition | Components | Test data available |
|---|---|---|---|---|---|---|
Model levels | ||||||
| 210247 | aermr16 | Nitrate fine mode aerosol mass mixing ratio | kg kg-1 | 2 | CAMS aerosol model | yes |
| 210248 | aermr17 | Nitrate coarse mode aerosol mass mixing ratio | kg kg-1 | 2 | CAMS aerosol model | yes |
| aermr18 | Ammonium aerosol mass mixing ratio | kg kg-1 | 2 | CAMS aerosol model | yes | |
| Pressure levels | ||||||
| 210247 | aermr16 | Nitrate fine mode aerosol mass mixing ratio | kg kg-1 | 1 | CAMS aerosol model | yes |
| 210248 | aermr17 | Nitrate coarse mode aerosol mass mixing ratio | kg kg-1 | 1 | CAMS aerosol model | yes |
| 210249 | aermr18 | Ammonium aerosol mass mixing ratio | kg kg-1 | 1 | CAMS aerosol model | yes |
Surface level | ||||||
| 210250 | niaod550 | Nitrate aerosol optical depth at 550 nm | dimensionless | 1 | CAMS aerosol model | yes |
| 210251 | amaod550 | Ammonium aerosol optical depth at 550 nm | dimensionless | 1 | CAMS aerosol model | yes |
New model output parameters
Discontinued model parameters
The "SO2 aerosol precursor" (aermr12/210012 and related diagnostics 215168–215175) have been discontinued, as the aerosol scheme now uses the same SO2 tracer as the chemistry (so2/210122).
Similarly, the sulfate tracer in the chemistry scheme (so4/217020 and related diagnostic tcso4/218020) is no longer used, as the chemistry now uses the same sulfate tracer as the aerosol (aermr11/210011).
| Old grib name | Old grib short name | Old grib parameter ID | New grib name | New grib short name | New grib parameter ID | |
|---|---|---|---|---|---|---|
| SO2 precursor mixing ratio | aermr12 | 210012 | Sulphur dioxide | so2 | 210122 | |
| Sulfate | so4 | 217020 | Sulphate Aerosol Mixing Ratio | aermr11 | 210011 |
Software
ecCodes
ecCodes version 2.12.1 provides full support for the new CAMS model output parameters introduced in IFS Cycle 46r1.
Availability of test data from the cycle 46r1 test suites
The CAMS operational FTP server (ECPDS) currently serves one day of test data (17 March 2019) in the directory "/DATA/CAMS_GLOBAL_TEST" and "/DATA/CAMS_EUROPE_BC_TEST" for global and regional boundary condition data, respectively. More details can be found here .
| Anchor | ||||
|---|---|---|---|---|
|
| Date | Reason for update |
|---|---|
| 11.04.2019 | Initial version |
30.04.2019 | Listing of all changes and their expected impact. |
| 20.06.2019 | Decision on expected implementation date |