Page History
Table of Contents |
---|
The continuing sequence of analyses
Each ECMWF forecast, atmospheric, wave or oceanic, does not stand alone. It builds upon an analysis incorporating the latest data together with output from a previous IFS model run.
...
ECMWF analyses the data available within two periods and for different reasons. The sequence of model data assimilation using 4D-Var that is followed by IFS forecast system is explained in more detail below.
The Long Window Data Analysis (LWDA):
The LWDA output fields constitute a stand-alone system for accurately analysing the evolving state of the atmosphere, but are generally not directly used by operational forecasters. Forecasts are only run to relatively short lead times for use as background fields in the 4D-Var analysis process for subsequent analysis processes 6hr and 12hr later. The LWDA analysis process allows the maximum use of available data but means the analyses are delayed significantly from the nominal data time. The LWDA process involves continuous data assimilation and can be referred to as Co-LWDA. (The Long Window Data Analysis was previously referred to as the "Delayed Cut-Off Analysis" but the term is now obsolete).
...
Fig2.6.2: The recurring cycle of the LWDA 4D-Var analysis. Consider the 12UTC LDWA: The 00UTC LWDA generates an 00UTC analysis but also provides an 06UTC analysis because it has access to data times between 03UTC and 09UTC. This 06UTC analysis becomes the basis of an 06UTC short forecast. This provides the first guess (at T+3, 09UTC) and then background fields for use by the SCDA 4D-Var process. The SCDA 12UTC analysis is used as the first guess for use by the LWDA 4D-Var process. LWDA then uses T+12hr and T+15hr as background fields to the end of the assimilation period (at T+15, 21UTC). The data arrival cut-off time is 02UTC (14hr after the nominal time (12UTC) of the analysis) to ensure all observations with data times between 09UTC and 21UTC are captured. The cycle is repeated for subsequent analysis cycles 12hr later.
The early delivery analysis (also known as short cut-off daily archive or SCDA):
The early delivery system extracts information from the products of the stand-alone LWDA system without waiting for the full LWDA analysis, yet providing sufficient information to enable ECMWF forecasts to be delivered without significant loss of effectiveness. The early-delivery analyses do not propagate information from cycle to cycle. Each analysis is reinitialized with the best available model fields from the LWDA assimilation.
...
Fig2.6.3: The recurring cycle of the early cut-off 4D-var analysis (SCDA). Consider the 12UTC Early Cut-off (SCDA): The 00UTC LWDA provides an 06UTC analysis that becomes the basis of an 06UTC short forecast. This provides the first guess (at T+03, 09UTC); background data during the rest of the 4D-Var analysis is provided by T+6hr to T+9hr forecasts (12UTC and 15UTC) from the 18UTC forecast. The cut-off time is 16:25UTC (4h25m after the nominal time (12UTC) of the analysis using CoDA between 16:00 and 16:25) to ensure as many as possible observations with data times between 09UTC and 15UTC are captured. The cycle is repeated for subsequent analysis cycles 12hr later. The early cut-off 4D-Var (SCDA) 12UTC analysis is used by the ensemble control member (CTRL). It is also used as first guess for the 12UTC LWDA. The EDA runs in parallel with the 4D-Var and a) constrains the 4D-Var analysis and b) provides information for evaluation of perturbations for the ensemble.
Continuous Data Assimilation (CoDA)
It is important to assimilate as much data as possible. Rejecting observations which arrive after the 4D-Var calculations have started runs the risk of missing the benefit of valuable, though delayed, information. To capture such delayed data the recently arrived observations are introduced into the 4D-Var assimilation after the calculations have started. This is done at the beginning of the next available outer loop of the 4D-Var iterations. The latest possible insertion of delayed data is at the start of the fourth outer loop at about 25 minutes after the assimilation process began. This allows the analysis to benefit from more recent observations and yields a more accurate final assimilation and analysis.
...
Fig2.6.4: Continuous Data Analysis in use. Consider the 12UTC Early Cut-off (SCDA): The SCDA 4D-Var assimilation suite starts at 16:00UTC but, to capture as much data as possible with observation times between 09UTC and 15:00UTC, observations arriving after 16:00UTC are introduced into the system at the start of each iteration of the algorithm (outer loop within 4D-Var). In the diagram, trajectory means the analysis as part of the ongoing evolution of the IFS; loop refers to the assimilation cycles within 4D-Var.
Additional Sources of Information
(Note: In older material there may be references to issues that have subsequently been addressed)
...