Geopoints

Geopoints is an ASCII format which can be generated 'by hand', or could be the result of a Metview computation. For example, the Observation Filter icon can return a geopoints variable as the result of filtering BUFR data (see Observation filtering and plotting Example).

The Metview Macro language has a number of functions available for the input, output, handling and operating on geopoints. Geopoints can be visualised with Metview and can be customised using symbol visual definitions - see Symbol Plotting.

The Geopoints file formats

A geopoints file is an ASCII file containing a header section and a data section consisting of several columns. There are some different 'flavours' of the format, described below.

The data elements that can be present in a geopoints file are the point coordinates (latitude and longitude), the level, date, time and value of either one or two parameters. A two-parameter geopoints file is considered by the plotting engine to contain the components of a vector quantity such as wind.

The format does not care about the alignment of columns, it just requires that there is at least one whitespace character between entries. The elements that must be present are an initial line tagged with the keyword #GEO, a line tagged with the keyword #DATA and the data points themselves. The lines in-between the header and the data sections are for human-readable information only and are not used in the interpretation of the file. All formats apart from the Standard format require an additional line in the header section to specify the format; this line must start with #FORMAT followed by the name of the format being used.

Note that a time should be expressed as HHMM; a time of 12 will be interpreted as 0012 , ie 00:12.

Standard (6-column) geopoints

This is the default format that Metview uses. This example shows a geopoints file containing dry bulb temperature at 2m (PARAMETER = 12004).

#GEO
PARAMETER = 12004
lat        long    level  date       time    value
#DATA
36.15      -5.35     0   19970810    1200    300.9
34.58      32.98     0   19970810    1200    301.6
41.97      21.65     0   19970810    1200    299.4
45.03       7.73     0   19970810    1200    294
45.67       9.7      0   19970810    1200    302.2
44.43       9.93     0   19970810    1200    293.4

#FORMAT XYV (Compact format)

This format allows data to be specified with just three columns: X (longitude), Y (latitude) and V (value). The start of an example file would look like the following:

#GEO
#FORMAT XYV
PARAMETER = 12004
x/long y/lat value
#DATA
-5.35  36.15  300.9
32.98  34.58  301.6
21.65  41.97  299.4

#FORMAT XY_VECTOR (XY Vector format)

This format allows two parameters to be stored as the components of a two-dimensional vector (for example uv wind components). The start of an example file would look like the following:

#GEO
#FORMAT XY_VECTOR
# lat    lon   height   date       time      u       v
#DATA
80       0      0      20030617    1200   -4.9001  -8.3126
80       5.5    0      20030617    1200   -5.6628  -7.7252
80       11     0      20030617    1200   -6.4254  -7.13829

#FORMAT POLAR_VECTOR (Polar Vector format)

This format allows two parameters to be stored as the speed and direction of a two-dimensional vector, the direction being specified in degrees where zero is due South and angles increase clockwise. The start of an example file would look like the following:

#GEO
#FORMAT POLAR_VECTOR
# lat      lon     height     date       time   speed   direction
#DATA
 50.97     6.05      0      20030614     1200     4       90
 41.97     21.65     0      20030614     1200     5       330
 35.85     14.48     0      20030614     1200     11      170

As the above file formats indicate, only one or two meteorological parameters may be stored in a geopoints file. To store more parameters in a single file, use a CSV file or something similar - see ASCII Tables.

For Polar Vector geopoints, only the first value (speed) is considered during operations. For XY geopoints, both values are considered during most operations where it makes sense to do so.

Currently the level, date and time can only be used for filtering (or can be extracted into Vector variables for other uses). They must be present in the file but you can specify any dummy value if you do not intend to use them.