...
The following table provides the encoding standards for all the surface variables defined at a given height level. The baseline list of variables is the variables used in the C3S.
attributes | ||||||||||
name (CMIP5/6&C3S) | dimensions | standard_name | long_name (CMIP5/6&C3S) | units | coordinates | cell_methods | valid_min | valid_max | global attributes |
---|
Note | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
tas | leadtime,lat,lon | air_temperature | "Near-Surface Air Temperature" | K | "reftime realization time leadtime height lat lon" | "leadtime: point" | "frequency": "<frequency_value>" |
| ||
tasmax | leadtime,lat,lon | air_temperature | "Daily Maximum Near-Surface Air Temperature" | K | "reftime realization time leadtime height lat lon" | "leadtime: maximum (interval: <value> <unit>)" C3S: interval is required. CF: interval is optional | "frequency": "<frequency_value>" |
| ||
tasmin | leadtime,lat,lon | air_temperature | "Daily Minimum Near-Surface Air Temperature" | K | "reftime realization time leadtime height lat lon" | "leadtime: minimum (interval: <value> <unit>)" C3S: interval is required. CF: interval is optional | "frequency":"<frequency_value>" |
| ||
tdps | leadtime,lat,lon | dew_point_temperature | "2m Dewpoint Temperature" | K | "reftime realization time leadtime height lat lon" | "leadtime: point" C3S: required CF: recommended | "frequency":"<frequency_value>" |
| ||
uas | leadtime,lat,lon | x_wind | Eastward Near-Surface Wind | m s-1 | "reftime realization time leadtime height lat lon" | "leadtime: point" C3S: required CF: recommended | "frequency":"<frequency_value>" |
| ||
vas | leadtime,lat,lon | y_wind | Northward Near-Surface Wind | m s-1 | "reftime realization time leadtime height lat lon" | "leadtime: point" C3S: required CF: recommended | "frequency":"<frequency_value>" | height is usually 10m height:valid_min = 1.;
| ||
wsgmax N/A in CMIP | leadtime,lat,lon | wind_speed_of_gust | "Maximum Wind Speed of Gust" N/A in CMIP | m s-1 | "reftime realization time leadtime height lat lon" | "leadtime: maximum (interval: <value> <unit>)" C3S: interval is required. CF: interval is optional | "frequency":"<frequency_value>" |
| ||
ua100m | leadtime,lat,lon | x_wind | Eastward Wind at 100m | m s-1 | "reftime realization time leadtime height lat lon" | "leadtime: point" C3S: required CF: recommended | "frequency":"6hr" | height=100m; | ||
va100m | leadtime,lat,lon | y_wind | Northward Wind at 100m | m s-1 | "reftime realization time leadtime height lat lon" | "leadtime: point" C3S: required CF: recommended | "frequency":"6hr" | height=100m; |
Surface Fields (not defined at a height level)
...