This icon generates the gridded input data and the AVAILABLE file needed to run the FLEXTRA trajectory model. The input forecast or analysis fields are automatically retrieved from ECMWF's MARS archive.
The macro language equivalent is flextra_prepare().
About FLEXTRA input data
FLEXTRA requires input fields on a regular latitude-longitude grid in GRIB format. The input data must contain four three-dimensional fields: the two horizontal wind components, vertical velocity and temperature. Two additional two-dimensional fields are needed as well: topography and surface pressure. The three-dimensional input data has to be available on ECMWF model (i.e. η) levels defined by a hybrid vertical coordinate system. An important restriction is that all the data fields used within a FLEXTRA run must have the same domain size, resolution, number of levels, etc.
All the required fields, with one exception, can be retrieved from ECMWF's MARS archive. The only exception is vertical velocity because FLEXTRA needs the following field for its computations:
\( \dot \eta \frac{\partial \eta}{\partial p} \)
Since only
\( \dot \eta \)
is archived in MARS the full product needs to be computed during the data preparation process (FLEXTRA Prepare does it for you).
FLEXTRA requires all the input GRIB files to be in the same folder using the following file naming convention: ENyymmddhh. In addition to the GRIBs FLEXTRA needs several parameter files as well. Most of these files are automatically generated by Metview in the background, so users do not need to create them. The only exception is the file called AVAILABLE because it can be optionally provided by the user.
The VAPOR Prepare Editor
Vapor Input Mode
Specifies the data input mode. The possible values are: Icon and Path.
In Icon mode a set of GRIB icons has to be specified in Vapor Input Data. If the mode is set to Path a period with a start and end date and constant time-step can be defined. In this case FLEXTRA Prepare tries to retrieve analysis fields from MARS whenever it is possible (for dates in the past) and uses forecast fields otherwise (for dates in the future).
Vapor Input Data
Specifies the input data as a set of GRIB icons. It is available when Vapor Input Mode is Icon.
Vapor Surface Params
Specifies the list of surface parameters from the input data to be converted into VAPOR format. The parameters are identified by their short names. The default value is an empty string.
Vapor Upper Params
Specifies the list of the upper level parameters from the input data to be converted into VAPOR format. The parameters are identified by their short names. The default value is an empty string.
Vapor Vertical Grid Type
Specifies the type of the upper level data to be used in VAPOR. The possible values are: Layered and Regular.
If the type is set to Layered VAPOR expects an upper level parameter specifying the elevation of each atmospheric. Internally in VAPOR this parameter is called ELEVATION. The default value is Layered.
Vapor Elevation Param
Specifies the name of the upper level parameter interpreted as the elevation of the upper levels. Available when Vapor Vertical Grid Type is Layered.
Vapor Bottom Coordinate
The name of the upper level GRIB parameter interpreted as the elevation of the upper levels. Available when Vapor Vertical Grid Type is Layered.
Vapor Top Coordinate
The name of the upper level GRIB parameter interpreted as the elevation of the upper levels. Available when Vapor Vertical Grid Type is Layered.
Vapor Area Selection
The name of the upper level GRIB parameter interpreted as the elevation of the upper levels. Available when Vapor Vertical Grid Type is Layered.
Vapor Area
Specifies the area of the output grid in south/west/north/east format. The default value is -90/-180/90/180.
Vapor Grid
Specifies the resolution of the output grid in dx/dy format, where dx is the grid increment in east-west direction, while dy is the grid increment in north-south direction (both in degrees units). The default value is: 1/1.
Vapor Refinement Level
Specifies the resolution of the output grid in dx/dy format, where dx is the grid increment in east-west direction, while dy is the grid increment in north-south direction (both in degrees units). The default value is: 1/1.
Vapor Vdf Name
Specifies the resolution of the output grid in dx/dy format, where dx is the grid increment in east-west direction, while dy is the grid increment in north-south direction (both in degrees units). The default value is: 1/1.
Vapor Output Path
Specifies the output directory (it has to be an absolute path) where the GRIB files and the AVAILABLE file will be generated. If this directory does not exist Metview will create it. The output GRIB files have the following naming convention: ENyymmddhh.
Vapor Reuse Input
If this parameter is set On FLEXTRA Prepare checks the existence of the data files to be generated and if they are already in place no new data is retrieved and processed. If it is Off all the fields are always retrieved and processed and the existing data files are overwritten. The same happens to the AVAILABLE file. The existence of a FLEXTRA input GRIB file is checked by using the file name and a set of GRIB API keys from the first message in the file. These keys are as follows: date, time, stepRange, gridType, iDirectionIncrement, jDirectionIncrement, latitudeOfFirstGridPoint, latitudeOfLastGridPoint, longitudeOfFirstGridPoint, longitudeOfLastGridPoint.
Flextra An Mars Expver
The MARS experiment identifier of the analysis fields. The default value is 1 (operational analysis).
Flextra Date
Specifies the run date of the forecast. Available when Flextra Prepare Mode is Forecast.
Flextra Time
Specifies the run time of the forecast . Available when Flextra Prepare Mode is Forecast.
Flextra Steps
Specifies the forecast steps in hours. Here a list of values is given. Available when Flextra Prepare Mode is Forecast.
Flextra Period Start Date
Specifies the start date of the period. Available when Flextra Prepare Mode is Period.
Flextra Period Start Time
Specifies the start time of the period. Available when Flextra Prepare Mode is Period.
Flextra Period End Date
Specifies the end date of the period. Available when Flextra Prepare Mode is Period.
Flextra Period End Time
Specifies the end time of the period. Available when Flextra Prepare Mode is Period.
Flextra Period Step
Specifies the time step of the period in hours. The allowed values are as follows: 3 or 6. Available when Flextra Prepare Mode is Period.
Flextra Area
Specifies the area of the output grid in south/west/north/east format. The default value is -90/-180/90/180.
Flextra Grid
Specifies the resolution of the output grid in dx/dy format, where dx is the grid increment in east-west direction, while dy is the grid increment in north-south direction (both in degrees units). The default value is: 1/1.
Flextra Top Level
Only data on and below this model level will be used to generate the FLEXTRA input fields. This level can be specified either as a model level or as a pressure value. In the latter case FLEXTRA Prepare will use the data retrieved for the first date to determine the topmost model level. The default value of this parameter is 1, which mens that all the model levels will be used if Flextra Top Level Units is set to Model Levels.
Flextra Top Level Units
Specifies the units of the value of Flextra Top Level. The allowed values are Model Levels or hPa. The default value is Model Levels.
Flextra Reuse Input
If this parameter is set On FLEXTRA Prepare checks the existence of the data files to be generated and if they are already in place no new data is retrieved and processed. If it is Off all the fields are always retrieved and processed and the existing data files are overwritten. The same happens to the AVAILABLE file. The existence of a FLEXTRA input GRIB file is checked by using the file name and a set of GRIB API keys from the first message in the file. These keys are as follows: date, time, stepRange, gridType, iDirectionIncrement, jDirectionIncrement, latitudeOfFirstGridPoint, latitudeOfLastGridPoint, longitudeOfFirstGridPoint, longitudeOfLastGridPoint.
Flextra Output Path
Specifies the output directory (it has to be an absolute path) where the GRIB files and the AVAILABLE file will be generated. If this directory does not exist Metview will create it. The output GRIB files have the following naming convention: ENyymmddhh.
Vapor Bottom Coordinate
The name of the upper level GRIB parameter interpreted as the elevation of the upper levels. Available when Vapor Vertical Grid Type is Layered.