Case description

In this exercise we will use Metview to explore the various ways ensemble forecast can be processed and visualised. The case we will investigate is related to a low pressure system crossing the UK on 10 August 2014: it caused high winds and heavy rain especially in the South-Western part of the country.

XXX Download data

Verify that the data are as expected.

Remember to give your icons useful names!

Setting the map View

With a new Geographical View icon, set up a cylindrical projection with its area defined as

South/West/North/East: 43/-20/60/10

Set up a new Coastlines icon with the following:

• the land coloured in cream
• the coastlines thick black
• use grey grid lines at every 5 degrees.

Part 1: Evaluating the forecasts

In this part of the exercise we will create the plot shown below:

In this plot each map contains the forecasts for the 10 m wind gust in a 6-hour period from various model runs:

• top left: the closest forecast to the event
• top right: the forecast run 4 days before the event
• bottom left: the ensemble mean for the ENS (Ensemble Prediction System)  forecast run 4 days before the event
• bottom right: the ensemble spread for the ENS forecasts run 4 days before the event

Defining the layout

With a new Display Window icon define a 2x2 layout so that each plot should contain your view. 

Visualising the latest forecast

The GRIB file fc_latest_oper.grib contains the latest forecast run preceding the event. Drag it into the top left map and customise it with the wgust_shade Contouring icon and the title_oper Text Plotting icon. Animate through the fields to see the location of the areas heavily hit by the storm.

Visualising the operational forecast

The GRIB file fc_oper.grib contains the operational forecast run at 7 August 00 TC (four days before the event). Drag it into the top right map and customise it in the same way as the previous plot. You will see that the wind storm was not present in the forecast.

Visualising the ensemble mean

The GRIB file fc_ens.grib contains the control forecast and the 50 perturbed and 1 control forecast member of the ENS run at 7 August 00 TC (four days before the event). We will compute and visualise the mean of the ensemble members.

The computations will be done in Macro, so create a new Macro and edit it. First, read the GRIB file in:

g=read("fc_ens.grib")

Our GRIB contains three time steps (84, 90 and 96 hours, respectively) and we would like to compute the ensemble mean for each one separately. To achieve this goal we will write a loop going through the time steps. First, define the fieldset that will contain the results:

e_mean=nil

Next, add this piece of code to define the loop (we store the time steps in a list).:

tsLst=[84,90,96]

loop step in tsLst

    ...your code will go here ...

end loop

Within the loop, first, read all the 51 ENS members for the given time step

f=read(data: g,
		step: step
	)	

Next, compute their mean with the mean() macro function

f = mean(f)

and add it field to the resulting fieldset:

e_mean = e_mean & f

By doing so the loop's body is completed. We finish the macro by returning the resulting fieldset:

return e_mean

By using the return statement our Macro behaves as if it were a fieldset (GRIB file). Drag it into the bottom left map and customise it with the wgust_shade Contouring icon. You would also need a custom Text Plotting icon. Take a copy of the one used for the previous plots (called title_oper) and tailor it to your needs. When you analyse the plot you will notice that the ensemble mean hints for higher wind gusts in the area of interest.

Visualising the ensemble spread

The ensemble spread is the standard deviation of the ENS members. You can compute it in a very similar way to the ensemble mean. The only difference is that this time you need to use the stdev() function instead of mean(). Now it is your task to write a Macro for it. Once you finished your Macro drag it into the bottom right map and customise it with the wgust_spread_shade Contouring icon and with a custom Text Plotting icon. You will see that the ensemble spread is fairly high in the investigated area indicating that ...

Part 2: Checking the probabilities

In this part we will estimate the risk of the wind gust being higher than certain thresholds. We will compute the probability of the wind gust exceeding 22 m/s (that is really stormy weather) and generate the plot shown below:

You can compute the probabilities with a Macro very similar to the ones you wrote for the ensemble mean or standard deviation. Basically you need to loop through time steps and for each time steps you need to derive a new field. The difference is that this time you need to compute a probability. Supposing that all the ENS members are stored in fieldset f and the threshold value in variable threshold the computation should go like this:

f=f > threshold	
f=100*mean(f)

Here the first line performed a logical operation on the fieldset and resulted in a new fieldset having 1s in each gridpoint where condition met (i.e. the value is larger than the threshold) and 0s in all other gridpoints. The probability is simply the mean of these fields. We multiplied the result by 100 to scale it into the 0-100 range for an easier interpretation.

Now it is your task to write a Macro and compute the probabilities. Once you finished your Macro drag it into the bottom right map and customise it with the wgust_spread_shade Contouring icon and with a custom Text Plotting icon. You will see that the ensemble spread is fairly high in the investigated area indicating that ...

Part 3: Creating a stamp plot

In this part we will look into the individual ENS members and create a plot showing all the ENS members for a given time step on the same page like this:

These plots, for an obvious reason, are called stamp plots. This a complex plot so we will write a Macro for it.

Create a new Macro and edit it. Drop your Geographical View and the Coastlines icons into the Macro editor. Once the code is generated and tidied up define a 6x9 layout so that each plot should contain your view:

dw=plot_super_page(pages: mxn_layout(my_view,9,6))

Next, drop your wgust_shade Contouring icon into the Macro editor and tidy up the generated code. We will apply this icon to all the fields in the stamp plot.

Continue with reading the GRIB file with the ENS forecasts in:

g=read("fc_ens.grib")

Define a variable to hold the time step we want to plot:

step = 90

The stamp plot spaghetti will be generated by plotting each perturbed forecasts member into a separate map. So we need to write a loop like this:

for number=1 to 50 do 

    ...your code will go here ...

end loop

Within the loop, simply read the current perturbed forecast members for the given time step:

f=read(data: g,
		number: number,
		type: "pf",
		step: step
	  )	

then plot it into your view with your contour settings:

Next define a title. The available space for the title in the plot will be confined (we need to squeeze more than 50 maps into a page) so title should be short:

title = mtext(text_line_1	: "PF: " & number)

We finish the loop by plotting the field into the right map in our layout:

plot(dw[i],title,f,wgust_shade)

Run your Macro (this will take a minute or so) and find the ENS members forecasting high wind speeds in our area of interest.

Part 4: Creating a spaghetti plot

We finish the exercise by looking into the predictability of the large scale flow pattern by generating spaghetti plots for 500 hPa geopotential from the same ENS run we investigated before.  A spaghetti plot is composed by plotting each ENS member into the same map using a single contouring value. The plot we want to generate is shown below (it contains the spaghetti plot for 500 hPa geopotential using the 560 gpm contouring value):

This is a fairly complex plot and we will write a Macro to produce it.

Create a new Macro and edit it. Drop your Geographical View and the Coastlines icons into the Macro editor. Once the code is generated and tidied up change the map area to

[40,-40,70,20]

so that map could show a larger (North Atlantic area).

Next define the contouring used for the "spaghetti":

cont = mcont(
	contour_label: "off",
	contour_level_selection_type	:	"level_list",
	contour_level_list	:	560,
	contour_line_colour: "blue",
	contour_highlight: "off"
 )

We turned contour labels off so that keep the plot uncluttered and defined only a single contour value. 

The spaghetti will be generated by plotting each perturbed forecasts member as a separate layer into the plot. So we need to write a loop like this:

for number=1 to 50 do 

    ...your code will go here ...

end loop

Within the loop, simply read all the perturbed forecast members for the all the time steps

f=read(data: g,
	type: "pf", 
	number: number
 )	

then plot it into your view with your contour settings:

plot(your_view,f,cont) 

If you run this macro you will see that the "spaghetti" was properly generated but you have too many titles (one for each layer i.e. 50). To get rid of the extra titles you need to define a custom Text Plotting inside the loop and add it to your plot() command:

title=mtext(text_line_1: "your custom title ....")

plot(your_view,f,cont,title)

The idea is that you should use the where statement inside the grib_info tag (as described here)  to have the title appear for one member only.

Once you sorted the the title out visualise your plot again and animate through the steps to see how the little spaghetti is dispersing over time.

Extra Work

Try the following if you have time.

Add more fields to the stamp plot

The stamp only shows the perturbed ENS members but there is still space left to display additional fields. Try to add the control forecast (from ENS) and the operational forecast to it.

Hints:

• plot the control forecast into map 51 (dw[51]). The control forecast is stored in the same file as the perturbed forecast members: fc_ens.grib. To access it (via the read() function) you need to omit the number parameter and set type to "cf".
• plot the operational forecast into map 52 (dw[52]). The operational forecast is stored in fc_oper.grib. For the read() command you just need to specify the step.

Add more fields to the spaghetti plot

The spaghetti only shows the perturbed ENS members. Try to add the control forecast (from ENS) and the operational forecast to it using different isoline colours.

Hints:

• plot the control forecast with a thick green isoline. The control forecast is stored in the same file as the perturbed forecast members: spag_ens.grib. To access it (via the read() function) you need to omit the number parameter and set type to "cf".
• plot the operational  forecast with thick red isoline. The operational forecast is stored in spag_oper.grib. You just need to simply read it in with the read() command.