| Terrestrial Service | Total Bandwidth (Mbps) | Data | Default |
|---|---|---|---|
| ter-1 | 240 | EPS, MSG, Sentinel-3A/B, Sentinel-5P, Third Party data, MTG | yes |
| ter-2 | 168 | Sentinel-6 data | |
| ter-3 | 230 | Sentinel-5P L1B, Sentinel-3A/B OLCI L1 FR, Sentinel-3A/B SLSTR L1B, FY3 HIRAS, FY4 GIIRS, GOSAT, MTG HRFI-FD (4 high-res full-disk bands) |
Note: Additional terrestrial services will be created in the future for various missions. If unsure of what services you need to enable on your station, please contact the EUMETSAT User Helpdesk (ops@eumetsat.int).
- Update user subscription in EO Portal
- Log into Reception station (e.g. ssh into it)
- Open the file called
tellicast-client.cfg
vi /etc/tellicast-client.cfg
4. Update the following parameter and save the file.
INSTANCE_START_ORDER=ter-1, ter-2
5. Open the file called cast-client_ter-2.ini
vi /etc/cast-client_ter-2.ini
6. Add credentials and tunnel IP to ter-2 configuration file and save the file
user_name=<username> user_key=<password> interface_address=10.0.0.11
7. OPTIONAL: Update storage path for new data, modifying cast-client-channels_ter-2.ini file (See also How to change file storage path)
vi /etc/cast-client-channels_ter-2.ini
8. OPTIONAL: Configure IP for NAKs (if enabled) using the following commands (See also How to enable NAKs)
iptables -t nat -A POSTROUTING --destination 193.17.9.7/32 -j SNAT --to-source <internal-IP of station>
iptables -t nat –L
Ensure the rule persists after reboot by saving the iptables rules:
sudo apt-get install iptables-persistent
iptables-save > /etc/iptables/rules.v4
9. Restart tellicast client software
sudo systemctl restart tellicast-client
Log entries for each terrestrial service can be found in /var/log/tellicast-client/recv_ter-x.log where x indicates the service, i.e. /var/log/tellicast-client/recv_ter-1.log for ter-1 service.